Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM

Photocoupler

Ozone Aging Chamber – ZSY-37 Model

Discover the advanced features of the ZSY-37 Ozone Aging Box, a reliable tool for testing the durability of rubber and other materials under controlled ozone conditions.

This Ozone Aging Test Chamber is designed to simulate real-world environments where materials are exposed to ozone, helping researchers and engineers evaluate their resistance to degradation over time.

Whether it's for quality control, product development, or academic research, this device provides precise and consistent results that meet international standards.

Overview

The ozone aging Test chamber is an essential climate simulation equipment used in laboratories to assess how vulcanized rubber and similar materials perform when exposed to ozone and specific temperature conditions. It allows for static tensile deformation tests without direct light exposure, making it ideal for long-term aging studies.

Its high-precision temperature controller ensures stable and accurate environmental conditions, making it a preferred choice for scientific institutions and industrial labs alike.

Main Technical Specifications

• Ozone Concentration Range: 0ppm ~ 5ppm
• Temperature Range: Room Temperature ~ 50°C
• Temperature Uniformity: ±2°C
• Temperature Fluctuation: ±0.5°C
• Test Piece Speed: 20 ~ 25 rev/min
• Cycle Motor: 25W
• Turntable Motor: 370W (Optional)
• Power Supply: 220V, 50Hz

Structural Features

• Constructed with high-quality cold-rolled steel and electrostatically sprayed exterior, with a stainless steel inner chamber for durability.
• Equipped with a high-efficiency corona discharge ozone generator for accurate ozone generation.
• Digital display of ozone concentration using imported sensors for precise control.
• Stainless steel turntable with adjustable fixtures for standardized sample placement.
• LED digital display for ozone concentration, along with built-in safety features such as over-temperature protection and automatic power-off.

Operating Conditions

• Temperature: 15°C ~ 35°C
• Relative Humidity: ≤85% RH
• Atmospheric Pressure: 86 ~ 106 kPa
• No strong vibrations or electromagnetic interference
• Avoid direct sunlight or heat sources
• Minimal air flow around the unit
• Ensure at least 60 cm clearance from walls or objects

Safety Precautions

• Always follow the manufacturer’s guidelines for installation and operation.
• Do not use for flammable, explosive, toxic, or corrosive materials.
• Install the equipment on a level surface and ensure proper grounding.
• Only trained personnel should operate or maintain the device.
• Never open the chamber unless absolutely necessary, as it may cause injury or damage.
• Regularly check and maintain all safety mechanisms.

Operation Instructions

1. Turn on the power switch and set the desired ozone concentration and temperature using the control panel.
2. Fix the test samples on the turntable, adjust the tension as required, and secure them properly.
3. Close the door and activate the system to start the automated test cycle.
4. Refer to the user manual for detailed instructions on operating the temperature and ozone controllers.

Daily Maintenance

• After testing, disconnect the power supply and store the equipment in a clean, dry place.
• If any components fail, replace them with identical parts only.
• Ensure that only trained personnel handle maintenance tasks.

For more information or assistance, please contact our support team. We continuously improve our products and welcome your feedback to help us enhance our services.