Timing enters the peak season of Christmas consumption in Europe and America, and the demand for distribution in the mainland before the lunar calendar appears, driving the return of LEDTV orders. As the penetration rate of LEDTV will exceed 50% next year, and the 2010 International LED Lighting Seminar hosted by ITRI will appear tomorrow. It is expected that the LED lighting market will grow substantially next year, stimulating a rare rebound in the LED community today. The leading edge of the crystal power industry has risen sharply, and the 100-yuan level has been stabilized, creating a new high in the half-year band, while Dongbei, Yiguang and Yiyuan are expected to grow in the next year. The stock price has also turned stronger.
LED lighting market prospects are promising, LCD TV LCDTV manufacturing giant Ruixuan Technology also plans to invest in LED lighting, and the main LED epitaxial chip supplier may be crystal, LED packaging supplier is Yiguang, driving the two stock prices relative Strong. However, Ruixuan has cooperated with Korean panel makers LGDisplay, LED epitaxial wafer makers, and Dongbei in TV TV backlights. The joint venture established in Yangzhou, China, will be officially launched in December this year.
LEDTV penetration rate will reach 60% next year, global sales volume is expected to reach 70 million to 80 million units, and LED factory will be optimistic next year, LED lighting applications will gradually increase, billion light, Dongbei, Jingdian and Yuyuan It is expected to maintain high growth next year. Dongbei's LED backlight revenue will see 5 billion yuan this year. Next year, the global market share is expected to stand at 10%, becoming the largest LED backlight factory in China.
Jingdian said that the TV backlight demand has returned to warm in November this year, but the legal person expects November revenue to be better than October, but compared with the third quarter revenue peak, there is still a gap.
Printed Circuit Board assembly sometimes called PCB Assembly(PCBA).
The bare board is populated with Electronic Components to form a functional. In through-hole technology, the component leads are inserted in holes surrounded by conductive pads; the holes keep the components in place. In surface-mount technology (SMT), the component is placed on the PCB so that the pins line up with the conductive pads or lands on the surfaces of the PCB; solder paste, which was previously applied to the pads, holds the components in place temporarily; if surface-mount components are applied to both sides of the board, the bottom-side components are glued to the board. In both through hole and Surface Mount, the components are then soldered; once cooled and solidified, the solder holds the components in place permanently and electrically connects them to the board.
PCB Assembly
PCB Assembly,PCB Circuit Board ,Electronic PCB Assembly,Professional PCB Assembly
Orilind Limited Company , http://www.orilind.com