Megatro 110kv Four Circuit Tension Transmission Line Steel Tubular Tower (MGP-FCT015)

• Model NO.: MGP-FCT015
• Conductor Circuit: Multi Circuit
• Materials: Steel
• Style: According to Client Requirements
• We Design by Pls& Tower Software: According to Client Requirements
• Transport Package: Export Standard Package
• Origin: Shandong, China

• Usage: Crossing Tower, Tension Tower, Angle Tower, Terminal Tower, Transposition Tower, Branching Tower, According to Client′s Technical Specification
• Certification: ISO
• Standard: According to Client Requirements
• Structure: According to Client Requirements
• Trademark: MEGATRO
• Specification: ACCORDING TO CLIENT
• HS Code: 73082000

MEGATRO 110KV Four circuit tension transmission line steel tubular tower 
Four-circuit transmission line has four circuits. For three-phase systems, each tower supports and insulates twelve conductors. Usually four circuits operate at the same voltage and at top of tower are OPGW.  Tension tower was located between every three or four suspension tower to pull the conductors which are re-tied in tension tower insulators. 
 

This photo refer to our 110KV four circuits tension tubular tower, which used in Chinese rural region transmission line project.  Tower legs are steel pipes and bracing consisted of angle steel. MEGATRO is equipped with sophisticated machinery and equipment for the manufacture of 110KV four circuits tension tubular towers, we have skilled worker with certificated welders, and offers design for our clients. In material we often adopt mild steel (ASTM A36, Q235B, ST37, BS40B), high strength and lower alloy (ASTM A572 GR50, GR65, Q345B, Q345C, Q420, Q460, S355J0, S355JR , ST52, BS50 and equivalent materials). 

MEGATRO can optimized design and make transmission tower less weight, high strength, proper span distance, good wind resistance, and economy in the use of materials. Our main design engineer from USA, can use PLS/TOWER software to design every type steel tower based on structural calculations and geometrical frame drawings. To meet the expectation, we produce shop drawings, components list and full production documentation, and even complete 3D models that facilitate the elimination of all design and drawings errors generated on the drawings. Another advantage is our 3D design and loading & design report, and can optimized the design and save cost for our clients. 
After fabrication all 110KV four circuits tension tubular transmission steel tower, are delivered to the galvanizing facility to be Hot DIP Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free 

Other information: 
Availability size: Based on the customer's requirements. 
Material: Chinese material or as per clients requirement 
Package: Both parties discuss before delivery 
Port of Loading: Qingdao Port 
Lead Time: One month or based on the customer's needs 
Minimum order: 1 set 
Fabrication standard: Chinese Standard or other standard which client accepted 

Steel grades 
Tower legs: Chinese steel Q345B, which same to ASTM A572 GR50 
Other webs, bracing and not stress plate and angle steel: Chinese Q235B, which same to ASTM A36 
Plates: Chinese steel Q345B, which same to ASTM A572 GR50 
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394 
A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2 
B) Hot dip galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123 
C) The welding will be performance in accordance with AWS D1.1 or CWB standard 
D) All fastener galvanization conform to ASTM A153 

If any special requirement, we can design and discuss with client. 
 

Metallized Polypropylene Film Capacitor

Film Capacitor,Ceramic Capacitor Co., Ltd. , http://www.nbxinqing.com