The Japanese government plans to submit relevant bills during the parliamentary meeting to promote the development of low-carbon electricity and support the development of clean energy markets.
At present, Japan requires ten power companies to purchase solar power for home use at a price of 48 yen (equivalent to RMB 3.85) per degree, and purchase electricity from a small-sized company at a price of 24 yen (equivalent to 1.93 yuan) per degree. Solar power. However, these power companies can distribute the additional costs evenly to consumers.
The existing stimulus plan will come into effect in April, and the new stimulus plan will be completed on the basis of some proposals that have just been approved by the government advisory group.
The following is the main content of Japan's new renewable energy stimulus plan that distinguishes it from the current stimulus plan:
In 2011-2012, 10 power companies can only purchase surplus solar power from small power generating units;
―Because of the drop in the price of solar panels, the solar power price to be paid by households will be reduced to 42 yen (RMB 3.37) per degree;
―The solar power price to be paid by small businesses will increase to 40 yen per unit (RMB3.2) to ease the government's cancellation of the subsidies for the installation of solar panels.
In 2012-2013 and in the future-In addition to the above 10 power companies, independent power producers also need to purchase renewable energy power;
―The requirement for purchase of renewable energy power will continue for 15 years;
― The program will cover solar, wind, biomass, small hydropower and geothermal energy, in addition to the excess solar power generated from the home;
― The on-grid tariffs for wind energy, small hydropower, biomass and geothermal energy are 15 Yen (RMB 1.2) or 20 Yen (RMB 1.6) per degree;
― The on-grid electricity price of solar energy will be determined later;
― The stimulus plan will not increase the cost of power companies, but will evenly distribute the increased costs to electricity consumers across the country.
PCB Prototype
Prototype PCB Specification:
In the process of developing a Printed Circuit Board-based solution for your company? This can be an extremely time-consuming, labor-intensive process where there is a high degree of uncertainty in the outcome. Developing a PCB prototype offers a fast, cost-effective option for getting your design from concept to production, while minimizing some of the risks associated with a Standard PCB service.
Prototype Printed Circuit Boards That Meet Our High Quality Standards:
BentePCB offers rapid PCB prototyping services in very good quality yet at a low cost. We're fully compliant with ISO9001:2008 quality management systems, and we have an in-house quality control department to verify that all work meets our high standards. Depending on your custom requirements, we can prototype your PCB within 3-7 days, compared to -18 days of Standard PCB service.
Check out our Circuit Board prototype capabilities in the following table:
|
Features |
Capability |
|
Quality Grade |
Standard IPC 2 |
|
Number of Layers |
1 - 16layers |
|
Order Quantity |
5pcs - 100pcs |
|
Build Time |
2 - 7 days |
|
Material |
FR-4 Standard Tg 140°C |
|
Board Size |
Min 6*6mm | Max 500*500mm |
|
Board size tolerance |
±0.1mm - ±0.3mm |
|
Board Thickness |
0.4mm - 2.0mm |
|
Board Thickness Tolerance |
±0.1mm - ±10% of thickness of board |
|
Copper Weight |
1.0oz - 2.0oz |
|
Inner Layer Copper Weight |
0.5oz - 1.0oz |
|
Copper Thickness Tolerance |
+0μm +20μm |
|
Min Tracing/Spacing |
5mil/5mil |
|
Solder Mask Sides |
As per the file |
|
Solder Mask Color |
Green, White, Blue, Black, Red, Yellow |
|
Silkscreen Sides |
As per the file |
|
Silkscreen Color |
White, Black |
|
Surface Finish |
Lead
Free HASL - RoHS |
|
Min Annular Ring |
5mil |
|
Min Drilling Hole Diameter |
8mil |
|
Min Width of Cutout (NPTH) |
0.8mm |
|
NPTH Hole Size Tolerance |
±.002" (±0.05mm) |
|
Min Width of Slot Hole (PTH) |
0.6mm |
|
PTH Hole Size Tolerance |
±.003" (±0.08mm) - ±.006" (±0.15mm) |
|
Surface/Hole Plating Thickness |
20μm - 30μm |
|
SM Tolerance (LPI) |
.003" (0.075mm) |
|
Aspect Ratio |
1.10 (hole size: board thickness) |
|
Test |
10V - 250V, flying probe or testing fixture |
What Are the Benefits of Circuit Board Prototyping?
We recommend you chose PCB prototyping service for function testing of new products prior to making a commitment to a full-production run. Benefits of developing PCB board prototype include:
• Rapidly test and correct designs if there is any mistake
• Opportunity to detect potential design flaws in the early stages
• Quick turnaround time helps you achieve your productivity goals
• Low-quantity production runs featuring a minimum order quantity of only one boards
• Lower production tolerances provide a clear indication of how well the finished PCB will perform
Once your prototype boards demonstrated their ability to meet your quality and performance requirements, it is ready for a full production run. Then we will transition to Standard PCB service. It provides tighter production tolerances and more advanced options including free Design for Manufacture (DFM) check that is capable of detecting potential issues which could reduce the quality of your PCB.
About Us:
BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.
Why Us?
UL (E492586), ISO9001, ISO14001, TS16949, RoHS certified.
Turnover USD 10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 16 layers.
Special Material:ROGERS, Arlon, Taconic.etc.
Client:Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.
Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):
Factory Tour:
Exhibition:
We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.
Delivery:
BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
FAQ:
Q1: What does BentePCB need for a customized PCB order?
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.
Q5: How about the service BentePCB offered to the customers?
A: If you have any questions about our products or company, do not hesitate to send us your inquiry toour customer service representatives, Your satisfaction is our pursuits.
We don`t just sell PCBs .We sell sleep.
Prototype PCB
Prototype PCB, Prototype PCB Board, Prototype Printed Circuit Board, High Density Prototype PCB
Shenzhen Bente Circuit Limited , http://www.bentegroup.com