Asia's first third-party wind energy technology center officially put into operation in Tianjin, Tianjin, June 15, 2011 - The world's leading inspection, certification, testing and certification organization SGS Standards Technical Services Co., Ltd. (SGS) was announced in June. It was announced on the 13th that the company's wind energy technology center in the west of the Tianjin Economic and Technological Development Zone was formally put into operation. This is the first third-party testing center in Asia to specifically inspect wind turbine blades. The technology center will be based in China, radiating Asia and even the world. With the leading industry technology and experience in the wind power industry, it will provide complete blades for domestic and foreign blade manufacturers. Full-scale testing services, raw material performance testing, blade design verification and other services. Mr. Yang Xiaoyong, Director of Tianjin Bureau of Quality and Technical Supervision, Mr. Zhang Jun, Deputy Director of Management Committee of Tianjin Economic and Technological Development Zone, Mr. Ke Ruizhi, Global CEO of SGS Group, Mr. Qi Guancheng, Chief Operating Officer of SGS China and Hong Kong, and Shen Tu, President of SGS China Mr. Xian Zhong attended the opening ceremony.
"As one of the world's most commercially-renewable renewable energy technologies, wind energy has become an important means for governments to cope with the dual challenges of energy shortages and climate change. We are pleased to see that China has become the world's largest wind power country, safe and Cleaner wind power is also expected to surpass nuclear power to become China's third pillar of energy,†said Mr. Ke Ruizhi, CEO of SGS Global. “As the company that has been listed in the Dow Jones Sustainability Index for two consecutive years, SGS has always regarded sustainability as the most important. Values, and tirelessly committed to the exploration of energy-saving, low-carbon and clean energy fields, we believe that with leading technical expertise and rich international project experience, SGS will surely promote China to gradually realize the transition from 'power of wind power' to 'power of wind power'. Change."
SGS Tianjin Wind Energy Technology Center occupies an area of ​​approximately 10,343 square meters with a total construction area of ​​approximately 3,786 square meters. The technical center strictly implements the ISO/IEC 17025 quality system and has already passed the China Metrology Accreditation (CMA) and is currently undergoing review by the National Qualified Laboratory Accreditation (CNAS) and the UK Royal Accreditation Council (UKAS), and has successfully passed the One-stage review. The laboratory is equipped with first-class test instruments and equipment such as hydraulic winch tensioner, hydraulic vibration actuator, laser line-distribution instrument, LVDT displacement sensor, pull-wire displacement sensor, acceleration sensor, tension sensor, digital hygrometer, and data collector. A complete blade full-size performance test can be provided. Test items include static testing, fatigue testing, and related non-destructive testing. The technical center also has the ability to perform relevant performance tests on blade manufacturing raw materials to form a one-stop inspection capability for the blades, support and service wind energy companies' new model blade product development, certification testing, blade design verification, production quality inspection, maintenance and Design changes and many other services. The important guidelines followed by the testing services provided by SGS are the protection of the security and intellectual property rights of independent third-party testing centers, blade installation and test implementation.
“SGS attaches great importance to Tianjin's unique regional advantages in the wind power industry and a mature international investment environment. The open cooperation policy provided by Tianjin Technical Supervision Bureau in terms of technology has also contributed to the formal operation of the SGS Wind Energy Center,†said SGT China President Shen Tu. Zhizhong said, “Our Tianjin wind energy center is equipped with cutting-edge technical equipment and excellent technical personnel, not only can facilitate the fan blade production enterprises in the 'doorway' for authoritative third-party testing and certification, but also improve the Chinese wind turbine unit and The level of technology research and development for major components will play a positive role in the development of wind power in China and even in Asia."
The testing of wind turbine blades has very strict requirements on technology, capital, and inspection personnel. At present, there are no more than ten wind turbine blade testing centers that meet the requirements of IEC61400-23, and most of them are located in Europe. SGS wind energy service started in wind power technology leading Europe and established SGS Global Wind Power Competence Center in Germany. The company has a large number of industry experts, powerful technology research and development capabilities and a huge global service network. In the field of wind energy, SGS can provide services throughout the entire life cycle of the turbine, including equipment supervision, construction and installation monitoring, materials and component testing, non-destructive testing, in-service fan services, failure analysis, technical due diligence, project certification and other services . In addition, SGS is also actively improving and strengthening offshore wind power services.
Zhang Jun, deputy director of the Tianjin Development Zone Management Committee, said that the SGS Group, known for its testing and certification services, has established long-term relationships with the Binhai New Area and the Fortune 500 companies in the development zone since it invested in the development zone in 2004. Good cooperation has played a positive role in enhancing the international competitiveness of enterprises and improving the quality and level of regional industry development. Today, SGS has established Asia's first third-party blade testing center, which will facilitate the development of China's wind power industry and add new vitality to the development of this field. It is hoped that the SGS Group will continue to deepen its cooperation with the development zone, play a greater role in leading, stimulating and serving in more areas and make greater contributions to the prosperity of Tianjin and Binhai New Area.
The new energy and new materials industry is one of the important pillar industries in TEDA. During the “Eleventh Five-Year Plan†period, the output value of new energy and new materials industry in TEDA has increased by 1.5 times, with an average annual growth rate of 26%. Wind power products in the development zone from scratch, from the initial production of spare parts to the current complete sets of equipment production, achieved a leapfrog development. During the 12th Five-Year Plan period, while maintaining and expanding the current scale of development, the wind power industry in TEDA will also rely on the advantages of the intensive development of Tianjin's wind power plant to vigorously develop wind power, such as blades, gear boxes, bearings, motors and control systems. Components, and take advantage of Lingang and Linhai, actively develop offshore wind turbines. The operation of the SGS Wind Energy Technology Center will play a positive role in promoting the rapid development of the wind power industry in TEDA.
SGS Standards Technical Services Co., Ltd. Tianjin Branch was established in 1993 and entered the development zone in 2004. In October 2007, an independent legal person company, "Bonding Standard Technical Service (Tianjin) Co., Ltd." was established. Since its establishment, Tianjin has invested in several laboratories including chemical, metal materials, polymer materials, mineral resources, mineral energy, petrochemicals, environment, food, and bicycle light industry. It has 420 employees specialized in inspection, appraisal and certification. , training and other work. In 2009, the company was awarded the title of Tianjin Postdoctoral Innovation Practice Base. In 2010, the company also passed the certification of Tianjin High-tech Enterprise and Advanced Technology Service Enterprise. At present, most of the Fortune 500 companies in the Binhai New Area are the company's service customers.
As a leader and innovator of fair and objective third-party inspection, verification, testing and certification services, SGS has always been committed to improving human health, safety and environmental protection, and is committed to providing specialized solutions for the sustainable development of various supply chains. With the continuous refinement of market division and intensified competition, the market environment facing enterprises is becoming increasingly complex. SGS will provide enterprises with customized certification services, sustainability report verification, service certification, risk management, energy conservation and emission reduction, and carbon reduction. Emissions and training services enhance the risk management capabilities of companies while increasing their production efficiency to ensure the sustainable development of the company.
"As one of the world's most commercially-renewable renewable energy technologies, wind energy has become an important means for governments to cope with the dual challenges of energy shortages and climate change. We are pleased to see that China has become the world's largest wind power country, safe and Cleaner wind power is also expected to surpass nuclear power to become China's third pillar of energy,†said Mr. Ke Ruizhi, CEO of SGS Global. “As the company that has been listed in the Dow Jones Sustainability Index for two consecutive years, SGS has always regarded sustainability as the most important. Values, and tirelessly committed to the exploration of energy-saving, low-carbon and clean energy fields, we believe that with leading technical expertise and rich international project experience, SGS will surely promote China to gradually realize the transition from 'power of wind power' to 'power of wind power'. Change."
SGS Tianjin Wind Energy Technology Center occupies an area of ​​approximately 10,343 square meters with a total construction area of ​​approximately 3,786 square meters. The technical center strictly implements the ISO/IEC 17025 quality system and has already passed the China Metrology Accreditation (CMA) and is currently undergoing review by the National Qualified Laboratory Accreditation (CNAS) and the UK Royal Accreditation Council (UKAS), and has successfully passed the One-stage review. The laboratory is equipped with first-class test instruments and equipment such as hydraulic winch tensioner, hydraulic vibration actuator, laser line-distribution instrument, LVDT displacement sensor, pull-wire displacement sensor, acceleration sensor, tension sensor, digital hygrometer, and data collector. A complete blade full-size performance test can be provided. Test items include static testing, fatigue testing, and related non-destructive testing. The technical center also has the ability to perform relevant performance tests on blade manufacturing raw materials to form a one-stop inspection capability for the blades, support and service wind energy companies' new model blade product development, certification testing, blade design verification, production quality inspection, maintenance and Design changes and many other services. The important guidelines followed by the testing services provided by SGS are the protection of the security and intellectual property rights of independent third-party testing centers, blade installation and test implementation.
“SGS attaches great importance to Tianjin's unique regional advantages in the wind power industry and a mature international investment environment. The open cooperation policy provided by Tianjin Technical Supervision Bureau in terms of technology has also contributed to the formal operation of the SGS Wind Energy Center,†said SGT China President Shen Tu. Zhizhong said, “Our Tianjin wind energy center is equipped with cutting-edge technical equipment and excellent technical personnel, not only can facilitate the fan blade production enterprises in the 'doorway' for authoritative third-party testing and certification, but also improve the Chinese wind turbine unit and The level of technology research and development for major components will play a positive role in the development of wind power in China and even in Asia."
The testing of wind turbine blades has very strict requirements on technology, capital, and inspection personnel. At present, there are no more than ten wind turbine blade testing centers that meet the requirements of IEC61400-23, and most of them are located in Europe. SGS wind energy service started in wind power technology leading Europe and established SGS Global Wind Power Competence Center in Germany. The company has a large number of industry experts, powerful technology research and development capabilities and a huge global service network. In the field of wind energy, SGS can provide services throughout the entire life cycle of the turbine, including equipment supervision, construction and installation monitoring, materials and component testing, non-destructive testing, in-service fan services, failure analysis, technical due diligence, project certification and other services . In addition, SGS is also actively improving and strengthening offshore wind power services.
Zhang Jun, deputy director of the Tianjin Development Zone Management Committee, said that the SGS Group, known for its testing and certification services, has established long-term relationships with the Binhai New Area and the Fortune 500 companies in the development zone since it invested in the development zone in 2004. Good cooperation has played a positive role in enhancing the international competitiveness of enterprises and improving the quality and level of regional industry development. Today, SGS has established Asia's first third-party blade testing center, which will facilitate the development of China's wind power industry and add new vitality to the development of this field. It is hoped that the SGS Group will continue to deepen its cooperation with the development zone, play a greater role in leading, stimulating and serving in more areas and make greater contributions to the prosperity of Tianjin and Binhai New Area.
The new energy and new materials industry is one of the important pillar industries in TEDA. During the “Eleventh Five-Year Plan†period, the output value of new energy and new materials industry in TEDA has increased by 1.5 times, with an average annual growth rate of 26%. Wind power products in the development zone from scratch, from the initial production of spare parts to the current complete sets of equipment production, achieved a leapfrog development. During the 12th Five-Year Plan period, while maintaining and expanding the current scale of development, the wind power industry in TEDA will also rely on the advantages of the intensive development of Tianjin's wind power plant to vigorously develop wind power, such as blades, gear boxes, bearings, motors and control systems. Components, and take advantage of Lingang and Linhai, actively develop offshore wind turbines. The operation of the SGS Wind Energy Technology Center will play a positive role in promoting the rapid development of the wind power industry in TEDA.
SGS Standards Technical Services Co., Ltd. Tianjin Branch was established in 1993 and entered the development zone in 2004. In October 2007, an independent legal person company, "Bonding Standard Technical Service (Tianjin) Co., Ltd." was established. Since its establishment, Tianjin has invested in several laboratories including chemical, metal materials, polymer materials, mineral resources, mineral energy, petrochemicals, environment, food, and bicycle light industry. It has 420 employees specialized in inspection, appraisal and certification. , training and other work. In 2009, the company was awarded the title of Tianjin Postdoctoral Innovation Practice Base. In 2010, the company also passed the certification of Tianjin High-tech Enterprise and Advanced Technology Service Enterprise. At present, most of the Fortune 500 companies in the Binhai New Area are the company's service customers.
As a leader and innovator of fair and objective third-party inspection, verification, testing and certification services, SGS has always been committed to improving human health, safety and environmental protection, and is committed to providing specialized solutions for the sustainable development of various supply chains. With the continuous refinement of market division and intensified competition, the market environment facing enterprises is becoming increasingly complex. SGS will provide enterprises with customized certification services, sustainability report verification, service certification, risk management, energy conservation and emission reduction, and carbon reduction. Emissions and training services enhance the risk management capabilities of companies while increasing their production efficiency to ensure the sustainable development of the company.
Full Outdoor Digital Signage,Full Outdoor Signage,Waterproof Lcd Display,High Brightness Digital Signage
Shenzhen Risingstar Outdoor High Light LCD Co.Ltd , https://www.risingstarlcd.com