Before fiber splicing a very important step is to cut the fiber, its weld strength and weld loss will have a very big impact. Xiaobian introduces the cutting principle of the most common fiber cutters in Fujikura, which can help you better understand and use the cutters.
1. After cutting the fiber end face
2, the principle of fiber cutting
It is the same principle as cutting glass with a glass cutter.
1. Fixed fiber
Press the fiber with the upper, lower, left and right clamps
2. Cut the knife mark on the fiber
The sliding blade cuts a knife mark on the fiber
3. Cutting
Use an anvil to break the fiber from the opposite direction of the tool mark
3, daily maintenance of fiber cutting knife
Clean the fiber clamps, anvils and blades with a cotton swab dipped in alcohol
Cleaning should be done when there is fiber debris left on the clamp or at a cutting angle greater than 3 degrees.
Bar Sign,Led Soft Light Tube,Outdoor Led Aluminum Bar Lamp,Full Color Strip Lamp
Kindwin Technology (H.K.) Limited , https://www.szktlled.com