MulTIsim11.0 official download (click the link to enter the enthusiast forum to download): Click this text to enter the official version of Multisim11.0 download
MulTIsim11.0 Chineseization + crack process: http://
MulTIsim11.0 finished package: http://
In addition, you can also take a look at this MulTIsim software usage article (click on the title to enter):
Electronic simulation software MultiSIM use methods and techniques
Simulation software Multisim11.0 installation and localization method:
First, the installation
1. Double-click the application (the one with 379.35MB) and the following window will appear first.
2, after the confirmation will appear the following window, to put it plainly, is a decompression process
3, select the first item, and then decompress, then the following window will appear, still select the first item
4, then select "Install this product for evaluation", the meaning of the trial
5, then follow the prompts all the way to mad Next, then restart it.
This installation is complete, the next is Chinese and cracked.
Second, finished
1. Place the ZH folder under the directory "...\ProgramFiles\National Instruments\Circuit Design Suite11.0\stringfiles".
Remember, it is not the directory "X:\NationalInstrumentsDownloads". This file is the second-step decompressed file when you install it. It can be deleted after installation. (A lot of friends make mistakes here)
2, then run Multisim11, inside the menu: Options\GobalPreferences\convention\language\ZH (reference picture)
At this point, the Chinese task has been completed.
Chinese description: This is the Chineseization of Multisim10.0, not fully finished, but it is enough
Third, crack
1. The following window will appear when it is not cracked. It can't be used after 30 days of trial.
2, run "multisim11 registration machine.exe", directly click on the following: Create licensefile... will generate a "**.lic" format file
(Note: The registration machine and the generated crack file should be placed under the path of the English name, otherwise there will be an error message, thank you for reminding the netizens downstairs!)
3, Start -> All Programs -> National Instruments -> NI LicenseManager -> Options -> Installation License File, as shown below, put it
After completing the above process, the software is activated.
Fourth, matters needing attention
Multisim11.0 has good support for win7 and Vista, but sometimes it has different problems for XP. I installed about 6 or 7 Win7 systems and a Vista machine. There were no problems with installation, localization or cracking. However, some 4 or 5 XP machines were installed, some of them failed to be installed, and all the cracks failed. For XP users, Multisim 10.0 can be installed without problems.
A reaction turbine is a type of steam turbine that works on the principle that the rotor spins, as the name suggests, from a reaction force rather than an impact or impulse force.
In a reaction turbine there are no nozzles to direct the steam like in the impulse turbine.
Instead, the blades that project radially from the outer edge of the rotor are shaped and mounted so that the shape between the blades, created by the cross-section, create the shape of a nozzle. These blades are mounted on the revolving part of the rotor and are called the moving blades.
The fixed blades, which are the same shape as the moving blades, are mounted to the outer casing where the rotor revolves and are set to guide the steam into the moving blades. Below is a simple diagram of reaction turbine blades:
Reaction Turbine Principle:
In the case of reaction turbine, the moving blades of a turbine are shaped in such a way that the steam expands and drops in pressure as it passes through them. As a result of pressure decrease in the moving blade, a reaction force will be produced. This force will make the blades to rotate.
Reaction Turbine Working:
A reaction turbine has rows of fixed blades alternating with rows of moving blades. The steam expands first in the stationary or fixed blades where it gains some velocity as it drops in pressure. Then enters the moving blades where its direction of flow is changed thus producing an impulse force on the moving blades. In addition, however, the steam upon passing through the moving blades, again expands and further drops in pressure giving a reaction force to the blades.
This sequence is repeated as the steam passes through additional rows of fixed and moving blades.
Note that the steam pressure drops across both the fixed and the moving blades while the absolute velocity rises in the fixed blades and drops in the moving blades.
The distinguishing feature of the reaction turbine is the fact that the pressure does drop across the moving blades. In other words, there is a pressure difference between the inlet to the moving blades and the outlet from the moving blades.
Special Aspects of Reaction Turbines
- There is a difference in pressure across the moving blades. The steam will, therefore, tend to leak around the periphery of the blades instead of passing through them. Hence the blade clearances as to maintain as minimum as possible.
- Also, due to the pressure drop across the moving blades, an unbalanced thrust will be developed upon the rotor and some arrangement must be made to balance this.
Reaction Steam Turbine
Shandong Qingneng Power Co., Ltd. , https://www.steamturbine.be