Samsung Note7 parallel imports can be changed for free
Because of the explosion risk of the battery, Samsung has to speed up the recovery of Note 7, which can at least fundamentally reduce the occurrence of tragedies. What is currently certain is that the BNM version of the Galaxy Note 7 does not have a battery door risk, but for those domestic users who have purchased non-banknote Note 7, how can they enjoy Samsung's recall plan?
Now, there are friends @ Fertile Wei drying out an interesting message on the microblogging, from the announcement information, non-State Bank Note 7 users can directly contact the Samsung China official for a new exchange, while the message also notes that non-oriented The mainland’s mobile phone users were first registered as “China†users.
In addition, in this replacement plan, Samsung also specifically suggested that there is a problem with Note 7, not more than 60% charged before the update.
It has to be said that Samsung will fully recover the problematic Note 7 this time, and the parallel replacement of the parallel imports will also reflect their responsible attitude. Do you think this is a conscience?
Tesla responds to fatal car crash in China: under investigation
According to foreign media sources such as Reuters, on Wednesday, local Tesla Motors issued a statement saying that it is investigating a fatal car accident in China this year.
Tesla said:
"Because of the damage caused by a car crash, the car could not transmit log data to our servers, so we did not know whether the vehicle had the 'Autopilot' function enabled at the time of the accident."
The company said that it has repeatedly tried to contact the driver's family to determine the cause of the crash, but his family members "have not provided us with any additional information so that we can further ascertain."
Bosch launches VisionX concept truck
Bosch Bosch has recently released a concept truck called VisionX. Bosch said that the “driver†of the truck will only be responsible for planning the route, processing the documents or just sitting in the car to observe. Markus Heyn, member of Bosch's Board of Directors, stated in a statement: "The future truck driver will no longer be a driver but will act as a logistics manager."
The Bosch VisionX concept truck will be a highly automated car that relies heavily on connectivity and electrification. Bosch has not revealed other details of this truck. Bosch will be exhibiting later this month at the International Motor Show in Hanover, Germany (IAA).
Another milestone in Microsoft speech recognition, error rate is the lowest in the industry
Recently, Microsoft’s chief speech scientist Huang Xuedong stated in the paper that they achieved a technical breakthrough of word error rate (WER) as low as 6.3% in the recent industry-standard Switchboard speech recognition benchmark test, which is 6.6% faster than IBM’s last week. The WER dropped by 0.3%, reaching the lowest error rate in the speech recognition field.
Huang Xuedong mentioned in the paper:
Our best single system achieved a 6.9% word error rate on the NIST 2000 Switchboard set. We believe this is the best performance that a single system can currently achieve. On Switchboard test data, the combination of multiple speech models will further reduce the word error rate to 6.3%.
Microsoft said that the principle of biological operation of the human brain inspired Microsoft to develop a deep neural network to achieve this breakthrough. In addition, they also mentioned the impact of deep learning algorithms of the Computing Network Toolkit (CNTK) on this technological breakthrough, and the contribution of GPU clusters to this advancement. Microsoft pointed out that Cortana can absorb more than ten times of speech data in the same time.
$70 million acquisition of biometric company EyeVerify, Ant gold suit has locked your eye
According to an informed source quoted by Bloomberg News, Alibaba Group’s Ant Financial Services acquired USDVerify, a biometrics technology company in Kansas City, Missouri, for US$70 million. Informed sources said that after the transaction is completed, EyeVerify will become a wholly-owned subsidiary of Ant Financial.
EyeVerify is a biometrics technology company specializing in the development of eyeball recognition. Unlike eyemarks, fingerprints, and other biometrics, EyeVerify uses technology that extracts data points from eyeball photographs.
According to reports, EyeVerify's verification process includes the two steps of photographing the eyeball and verifying the information: The user holds the mobile phone in front of his eyes, stares at the camera of the mobile phone, and then turns the eyeballs to the sides to complete the entire shooting process. The user can log in to the relevant account only after verifying by his/her program. EyeVerify claims that its technical accuracy is over 99.99% (What's the difference between saying 100% directly?).
Scientists Develop 3D Printable Implant Materials to Promote Bone Regeneration
A group of researchers from the University of Puebla Autonomous University of Mexico (BUAP) have developed new synthetic 3D printed biomaterials that can fully simulate bone structure and promote bone regeneration.
It is understood that this result was obtained by a group of researchers led by Efrain Rubio Rosas. According to him, the biodegradable material consists of various degradable polymers and hydroxyapatite, a mineral that can usually be found in the human body. “The human skeleton consists of organic materials such as collagen, protein and growth factors, and other inorganic materials such as calcium phosphate and hydroxyapatite crystals. These can all be obtained synthetically when they are used for prosthetic implants. When you enter, you may not be rejected by the body," he said.
DXZPET tinned copper braided sleeve /tinned copper braided belt/copper braided wire
Tinned copper Braided Sleeve/ tinned copper braided belt/ copper braided wire, is braided by multi-strand (example: 13s, 16s, 24s, 36s, 40s, 48s, 64s, 96s) high quality round copper wire or tinned soft round copper wire with the way of single layer or multilayer.
The outer diameter size of the copper wire: 0.1mm, 0.12mm, 0.15mm, 0.20mm. The DC resistance ( 20℃ )of copper braided wire is not more than 0.22 Ωmm2 /m , the DC resistance ( 20℃ )of tinned copper braided wire is not more than 0.0234Ω mm2 /m .
DXQZ- tin plated copper light weight shielding braided is made by specific copper wires which are braided refinedly, product has the advantages of
shielding to electromagnetic signal, light weight, good flexibility and others, it can reduce the total weight of finished products compared with tin plated copper braided sleeves.
ST-PB Velcro Shielding Sleeving is made by the composite of tinned copper hook wire, fire retardant cloth and magic tape, has the e
ffects of shielding high sensitive electromagnetic interference, reducing noise, dust prevention and earth leakage protection. Velcro Shielding Sleeve is widely used in railway vehicle, high-speed rail, automotive, aerospace, communication, industrial machinery, medical equipment, electronic appliances and oth1r fields.
OAF- Aluminum foil Fiberglass Heat Reflective Sleeving (Aluminum foil fiberglass tube)is made of two layers, Aluminum foil fiberglass sleeve the inner is weave by glass fiber yarn, the outer layer cover a layer aluminum foil. Due to the use of special processing, the product good shading, reflecting heat, insulating heat, shielding signal, resistance to high-low temperature and other good characteristics.
ZIP-PB Zipper Design EMI Shielding Sleeving is made of the recombination of tinned copper hook silk net,flame retardant cloth and zipper. Zipper EMI Shielding Sleeve Has the characteristics of shielding High sensitive electromagnetic interference, noise-reduction, dust proof and abrasion resistance.With the zipper design,Zipper Shielding tube easy for installation and removal, convenient to use.
PNBT -metal shielding open-type densely woven protective sleeve , this shielding braided sleeve has excellent shielding, opening structure, easy to install, overhaul, and reusable. Metal braided sleeve widely used for anti-interference shielding protection of electronic, electrical and mechanical, railway, automotive wiring harness, optical fiber communication, aerospace wiring harness signals.
Tinned copper shield braided sleve,Electromagnetic information shielding braided sleeve,Very light shield braided sleeve,Aluminum foil fiberglass tube,Velcro shielding sleeve,Zipper shielding sleeve,Metal braided sleeve
KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com