On June 30th, vivo officially released the upgrade version of X6/X6 Plus in Beijing - x7, vivox7plus. The two models differ only in screen size, battery capacity, and rear camera, and there is no difference in appearance and configuration.
Faced with the crazy momentum of the oppor9plus series sweeping the country, the x7 series shoulders the important mission of sniper. Undoubtedly, the X7 series has this strength, the stylish and eye-catching appearance, the balanced and comprehensive configuration and the relatively close price of the people are enough to make it a good place in the market. The following small series will bring the disassembly of vivox7plus, and look at its delicate appearance, what kind of inner heart.
Turn off the SIM card tray as usual.
In general, a mobile phone with an integrated metal body design needs to remove the bottom screw to remove the metal middle frame. Xiaobian has already screwed them out.
Then use the suction cup to suck up the screen section.
The powerful little partners can be separated directly without the help of the crowbar tool. However, the small series suggest that the force can not be used too much at one time, and it is more suitable to use the crowbar tool to slowly separate.
As can be seen from the above figure, the components of vivox7plus are all on one side of the screen, so the back cover and the middle frame are easily separated, and the maintenance is not difficult. It can be seen that the whole back cover and the middle frame of vivox7plus are integrally formed of metal. The structure adopts the classic three-stage design, the upper part is the main board, the middle large battery, and the bottom part is the tail plug small board. The layout is very compact and it is also reasonable to place.
Before disassembling the upper and lower parts, be sure to disconnect the power supply to avoid accidents. The battery cable interface is hidden under the metal bracket and is firmly fixed.
The vivox7plus is equipped with a 4000mAh high energy density battery that supports dual engine flashing. The battery is attached to the metal back shell by double-sided tape, and the tail of the small board is routed under the battery.
Take off the two cables of the tail plug-in board, and the next step is to disassemble the core component of the vivox7plus.
Remove the cable of the vibrator, remove all the screws on the main board, and remove the metal brackets that fix the vibrator and peripheral components.
Separating the motherboard and camera, the vivox7plus uses a front 16 million pixel camera, aperture F2.0; rear 16 million pixel camera, CMOS for Sony IMX298, phase focusing, aperture F2.0.
On the other side of the motherboard, there are or card slots, SoC (éªé¾™652), 4GB RAM+128GB ROM, light distance sensor, Moonlight flash and other components. The surface of the SoC shield is covered with a layer of copper foil. Due to the long series of measurements of the X7 Plus, there is no violent disassembly.
Next, the speaker module is disassembled. The module integrates the speaker and the vibration motor, and the contacts are connected with the tail plug small board. Unscrew all the screws and remove the protective cover.
Remove the two lines on the front and back and remove the tail plate.
In the speaker module part, the vivox7plus uses waterproof foam to protect the main components.
The vivox7plus series is the first mobile phone with a frontal fingerprint unlocking design. It can be unlocked with a touch of light. The surface is made of zirconium and the surface is more sensitive. The black screen is unlocked as fast as 0.2 seconds and the bright screen is unlocked as fast as 0.15 seconds.
Vivox7plus overall is not very difficult to dismantle, but when the back shell and the screen panel are separated, it costs a lot of effort, which also shows that the work of vivox7plus is very solid. The parts layout is very compact, but it is still well organized. Moreover, the upper and lower parts were fixed with more than a dozen screws, and there was no cut corner. It is also very convenient to disassemble the battery without any tools. Therefore, the whole machine should be very convenient to repair and it is very rare. In addition, the various details of the parts work is also quite good.
Pipe Reamer,Reamer Bit,Hand Reamer,Tapered Reamer
Dragon Crown Medical Co., Ltd. , https://www.dragoncrownmed.com