Introduction to the grounding method of the instrument - Huaqiang Electronic Network

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Photocoupler

At our company, we are committed to meeting the diverse needs of our customers by designing and manufacturing a wide range of high-quality products. Our focus on specialization and standardization ensures that every product is not only reliable but also tailored to meet specific user requirements.

The stability and consistency of our components play a crucial role in reducing production costs and ensuring the development of high-quality electronic scales. This reliability is essential for maintaining precision and performance in various industrial applications.

This section introduces you to the key aspects of the scale system, including its grounding method, which is vital for ensuring safe and accurate operation.

Grounding Method:

The grounding wire should be connected to the grounding pile embedded in the foundation pit of the weighing instrument. This method is similar to using a copper rod. Once the pit is completed, the grounding conductor must be properly connected to the grounding pile. If the grounding pile is covered with concrete during construction, it's important to ensure that the grounding wire is securely attached before the concrete is poured. Otherwise, if the wire is buried inside the concrete, it may corrode over time, leading to an ineffective connection. A more effective approach is to weld the grounding piles using steel bars before the concrete is set.

When setting up the grounding system, the distance between grounding points in the weighing system should be no less than 3 meters. When driving the grounding rods vertically into the ground, the depth should not be less than 2 meters, ideally around 3 meters. For horizontal installation, the burial depth should be at least 0.7 meters. The grounding body must be galvanized or copper-plated, and painting is strictly prohibited. A copper wire with a cross-sectional area of at least 25 square millimeters is recommended, and its resistance should be no more than 1 ohm. After installation, the overall grounding resistance should be less than 4 ohms.

Our company also offers a variety of other products, such as mobile truck scales, signal output cylinders, track scales, and weighbridges. Whether you need a compact solution or a large-scale system, we have the right product for your application.

We welcome you to visit us and explore our full range of products. Contact us today to find the perfect solution for your needs!