Millet TV 3 release: split host screen host can be sold separately




On the afternoon of October 19 in Beijing, Xiaomi Company released a 60-inch millet TV 3 in Beijing. The TV uses a separate screen on the host screen. The TV host integrates a stand-alone stereo and can be sold separately.

Millet TV 3 first 60-inch version, using ultra-thin design, side top 11.6mm, bottom 36.7mm. The fuselage uses a full metal fuselage, aluminum alloy frame two-color anodizing process.

Using 4K LGD screen, the backlight module was developed independently. The image engine added a motion image compensation MEMC based on Xiaoshi TV 2s, equipped with a 6M60 independent image processing chip, and the color gamut exceeded 85%.

Using six independent sounds in audio, the volume of the sound cavity has increased by 67%. The software invited Luca to tune and support Dolby sound.


In addition, the millet TV 3 is split TV, users can independently upgrade the screen and host, TV TV host integrated in the independent sound. The combination of power cords and signal cords is called a rice noodle and is used to link the TV host and the screen.


At the same time, the integrated audio TV host will be sold independently and directly connected to other TVs, projectors, and VR devices via the HDMI cable.

The host uses the MStar 6A928 processor, which is based on the Cortex-A17 quad-core 1.4GHz processor and is equipped with the Mali-760 dual quad-core burst processor and supports H.265 10bit 4K 60fps hard decoding. With 2GB DDR3 memory, 8GB eMMC 5.0 internal storage. Supports 802.11ac dual-wire dual-broadcast WiFi and 4.1 low-power Bluetooth.

Users can purchase extra millet subwoofer and 99 yuan Bluetooth remote control.

In terms of content, Xiaomi TV supports four licensees including Mango TV, Wah TV, CNTV and CIBN. In addition, Xiaomi is also investing in a content manufacturer and a joint venture with Huayi Brothers to establish the New Church.

Millet TV 3 is priced at RMB 4999. Millet TV host price of 999 yuan.

High-power Led Street Lamp is a kind of mainstream light source configuration widely used in Road Lighting project.The aluminum alloy surface of its radiator is treated with deep anodic oxidation, which can resist all kinds of harsh environment.In addition, its patented vertical natural convection heat dissipation structure, high heat dissipation efficiency, small volume, light weight, at the same time, it uses high quality long life LED packaging materials, LED light pass maintenance rate. 

high-power led street lamp

Technical parameters

Power source

AC85~260V/50~60Hz

Power

60W-120W

LED junction temperature

<60℃

LED luminous efficiency

>100 Im/W

The initial light flux

6000Lm-12000Lm

Light output efficiency of light

>90%

Color temperature 

4000K-6500K

 Color rendering

Ra>75

 Power factor

>0.95

 Protection class 

IP65

 Operating temperature

-40℃~+50℃

Wind Index

 12 level

Lamp life

>50000h

 



High Power LED Street Lamp

High Power Led Street Lamp,Led Street Lamp,Led Street Lamp Bulbs,Led Street Lamp Price

Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulighting.com

Posted on