12 Port wallmounted Patch Panel
1.GL-4012A-110Â Â 12 port Cat.5e Patch panel(110 IDC)
2.GL-4012A-Dual  12 port Cat.5e Patch panel(Dual IDC)
3.GL-4012A-KRÂ Â Â Â 12 port Cat.5e Patch panel(krone IDC)
4.GL-4012B-110Â Â 12 port Cat.6 Patch panel(110 IDC)
5.GL-4012B-Dual  12 port Cat6 Patch panel(Dual IDC)
The main commutation mean is patch cords (a sections of cable, usually up to 5 m long, of the appropriate category with plug-type connections at the ends). They are used to connect patch panel ports, active equipment, sockets at the working places (PC, telephones, printers, etc).
The cable is laid to each port and using a special tool is mounted (connected to) in the IDC module (IDC is Insulation Displacement Connection). There are the following types of IDC modules: of type 110 , Krone and Dual IDC (universal). Depending on the module type different tools are used for cable mounting. Dual IDC is a universal module and admits use both 110 type tool and Krone type tool for cable mounting.
Panels may be mounted on the wall and in 19" telecommunication cabinets, racks and frames. Some kinds of panels are produced according to standard 10".Â
12 Port wallmounted Patch Panel
1.GL-4012A-110Â Â 12 port Cat.5e Patch panel(110 IDC)
2.GL-4012A-Dual  12 port Cat.5e Patch panel(Dual IDC)
3.GL-4012A-KRÂ Â Â Â 12 port Cat.5e Patch panel(krone IDC)
4.GL-4012B-110Â Â 12 port Cat.6 Patch panel(110 IDC)
5.GL-4012B-Dual  12 port Cat6 Patch panel(Dual IDC)
The main commutation mean is patch cords (a sections of cable, usually up to 5 m long, of the appropriate category with plug-type connections at the ends). They are used to connect patch panel ports, active equipment, sockets at the working places (PC, telephones, printers, etc).
The cable is laid to each port and using a special tool is mounted (connected to) in the IDC module (IDC is Insulation Displacement Connection). There are the following types of IDC modules: of type 110 , Krone and Dual IDC (universal). Depending on the module type different tools are used for cable mounting. Dual IDC is a universal module and admits use both 110 type tool and Krone type tool for cable mounting.
Panels may be mounted on the wall and in 19" telecommunication cabinets, racks and frames. Some kinds of panels are produced according to standard 10".Â
To use these connectors, the ribbon cable is inserted into the Ribbon Connector and the connector is then plugged into the Ribbon Connector on the circuit board. The connectors are designed to provide a secure and reliable connection that can withstand repeated insertions and removals.
Overall, the 2.54mm Ribbon Connectors are an essential component in many electronic devices that require a reliable and secure connection between the ribbon cable and the circuit board.
2.54Mm Ribbon Connector,Pressure Welding Bar Connector,Pressure Welding Bar Connectors,Welding Bar Connector
YUEQING WEIMAI ELECTRONICS CO.,LTD , https://www.weimaiconn.com