Recently, the LED street lamp energy-saving renovation project in a certain city of Guangdong Province was successfully completed and put into use. The customer has adopted the 3700-inch overclocking three LD3C-3 (90W) street light kit. The LD3C kit is simple and beautiful in appearance, and is integrated with the surrounding environment to complement each other.
.jpg)
.jpg)
Daytime scene
When the night falls, the overclocked three LD3C-3 street lights installed in the green belt of the road will be lit up collectively, and the bright light will cut through the night sky. In the harsh environment such as heavy rain, fog, and strong winds, as always, high-quality lighting meets the lighting needs in the visual orientation to provide the best visual enjoyment for pedestrian vehicles. While dressing up the night scene, it provides high-reliability lighting protection for the citizens with green light source.
.jpg)
.jpg)
Night scene
The original road segment lighting has traditionally used traditional metal halide lamps for many years, but the effect is not ideal. Not only the lighting is low-light, the energy consumption is high, the faults are frequently appeared, the maintenance and replacement rates are extremely high, and it is costly and laborious. After continuous consideration and multi-party collection, the customer finally used the overclocked three LD3C-3 (90W) street lamp and installed it on the 11-meter-high pole to replace the traditional metal halide lamp before the transformation.
.jpg)
Retrofit effect map
After the overall replacement, the lighting effect is greatly improved, not only the illumination is increased by at least 40%, but also energy saving is 60%. With the intelligent software system, the skylight is automatically illuminated, the daylight is automatically turned off, the lamp life is long, the failure rate is low, and a lot of manpower is reduced. Material resources have achieved the effect of low-carbon energy conservation, providing citizens with better travel conditions, and have been unanimously appreciated by customers and local government personnel, and are very satisfied with the lighting effects and energy-saving effects.
.jpg)
.jpg)
LD3C series street lamp kit has many advantages. It is manufactured by stamping process. The material has good heat dissipation and is lighter than the average product. It is more convenient to install and cost-effective.
.jpg)
In terms of protection, the overclocking three LD3C series street lamps have their own protection level of IP67. They adopt a silicone ring sealing process to completely prevent dust intrusion and no water seepage during heavy rain. Through professional wind tunnel test, the maximum wind speed is 65m/s. In the 17th grade hurricane, there is no deformation, looseness, etc., which is extremely firm; and the whole lamp adopts the powder baking process, which is bright and long-term discoloration, and is not easy to corrode, and is suitable for a harsh outdoor environment.
In terms of optics, the overclocking three LD3C series street lamps are equipped with a variety of lenses, and the light transmittance is 93%. The illuminance of this lens is very uniform, the spot is batwing, the edge is clear, there is no bad glare, no radiation, no light pollution. Under the premise of ensuring the ideal road surface brightness, the light loss and energy consumption are minimized, making the human eye feel comfortable and harmless to the human body.
The LED street lamp renovation project has achieved good lighting effects, which not only saves energy, saves resources, beautifies the environment, but also satisfies the needs of urban road lighting to the greatest extent, and brings a perfect green energy-saving lighting experience to the masses of travellers.
.jpg)
(This article is overclocked three submissions)
Other Categories,High Quality Other Categories,Other Categories Details, CN
Miraclean Technology Co., Ltd. , https://www.mrccleanroom.com