(Part 2 of Bidding) Announcement of Tender Notice for 350MW Desulfurization and Ultra-low Emissions Renovation Project and Wet Electrostatic Precipitation Renovation Project for #5 and #6 Units of Yangcheng International Power Generation Co., Ltd.

(Part 2 of Bidding) Announcement of Tender Notice for 350MW Desulfurization and Ultra-low Emissions Renovation Project and Wet Electrostatic Precipitation Renovation Project for #5 and #6 Units of Yangcheng International Power Generation Co., Ltd.

Under the entrustment of Yangcheng International Power Generation Co., Ltd. (hereinafter referred to as the “Tenderee”), domestic open tendering for the 350MW desulphurization and ultra-low emission retrofit project and wet-type electrostatic precipitator renovation project for #5 and #6 units of Yangcheng International Power Generation Co., Ltd. was conducted. .

First, the scope of tender

(1) 350MW desulfurization and ultra-low emission retrofit project for #5 and #6 units: Tender No.: CWEME-201612SXYC-J001 Yangcheng International Power Generation Co., Ltd. #5 and #6 units (2×350MW) ultra-low emission retrofit project, including: Desulfurization absorption tower, oxidation fan, process water, electrical, DCS, CEMS, etc. Renovation design, equipment, material procurement and manufacturing, supply, installation, system commissioning, test and inspection, commissioning, defect elimination, training and final delivery Wait. (2) 350MW Wet Electrostatic Precipitation Renovation Project for #5 and #6 Units: Tender Number: CWEME-201612SXYC-J002

Yangzhou International Power Generation Co., Ltd. #5-#6 Unit 350MW wet-type electrostatic precipitator renovation project, including the transformation of the plate-type wet electrostatic precipitator and the desulfurization absorption tower outlet flue design proposal, equipment and materials procurement, manufacture, supply, installation , system commissioning, testing and inspection, commissioning, deficiencies, training, and final delivery and production.

Second, bidder qualification requirements

(1) 350MW desulfurization and ultra-low emission retrofit project for #5 and #6 units

Bidding number: CWEME-201612SXYC-J001

2.1 The power to have legal personality and the ability to independently enter into and perform contracts, the registered capital of the enterprise shall not be less than 70 million yuan;

2.2 With Class A or above qualification of environmental engineering (air pollution prevention and control project), it can engage in the corresponding construction project general contracting business as well as project management and related technical and management services within the scope of the qualification certificate;

2.3 The corresponding qualifications and capabilities of design, manufacture, installation, commissioning, quality control, operation and management in terms of professional technology, equipment and facilities, personnel organization, and performance experience;

2.4 With the relevant calculation ability of the desulfurization system;

2.5 Total desulphurization performance of coal-fired thermal power units of 300 MW or more units with a capacity of 2 sets or more in the last five years, and providing a copy of the contract (cap unit), with good operational results, and installation and commissioning No major equipment quality problems were found during the operation.

2.6 Has good bank credit or business reputation, is not in a state that has been ordered to suspend business or is in bankruptcy, and assets have not been reorganized, taken over and frozen, and good financial reports and statements for the past three years;

2.7 During the construction of the engineering projects undertaken by the China Datang Corporation in the past, there were no technical, quality or commercial disputes involving the main responsibility of the bidding unit;

2.8 The project does not accept bids from the Consortium;

2.9 In the last three years, there has been no fraudulent bid, serious breach of contract, and no major or higher quality and safety accidents occurred in the equipment supplied;

2.10 It is not an unqualified bidder with corruption, fraud, etc. as defined by the relevant state agencies.

(2) 350MW Wet Electrostatic Precipitation Renovation Project for #5 and #6 Units: Tender Number: CWEME-201612SXYC-J002

2.1 The power to have legal personality and the ability to independently conclude and perform contracts, the registered capital of the company shall not be less than 10 million yuan.

2.2 The corresponding qualifications and capabilities in design, manufacture, installation, commissioning, quality control, and operation and management of professional technology, equipment and facilities, personnel organization, and performance experience.

2.3 The power station boiler dust collector related computing capabilities.

2.4 In the past five years, the total contracting performance of wet scrubbers with 2 sets (including) or more 300MW class units and above of coal-fired thermal power units has been completed, and a copy of the contract has been provided (covering units), which has good operating results. No major equipment quality problems were found during installation and commissioning.

2.5 Has good bank credit or business reputation, is not in a state that has been ordered to suspend business or bankruptcy, and assets have not been reorganized, taken over and frozen, and good financial reports and statements for the past three years.

2.6 During the construction of the project to undertake the China Datang Corporation system in the past, there were no technical, quality or commercial disputes involving the main responsibility of the bidding unit.

2.7 The project does not accept bids from the Consortium.

2.8 In the last three years, there has been no fraudulent bid, serious contract, and there has been no serious or above quality and safety liability accidents in the supplied equipment.

2.9 Unqualified bidders who are not classified by the relevant state agencies as having corruption, fraud, etc.

Third, the tender documents

3.1 Way of obtaining the bidding documents: login, with the enterprise CA certificate electronic key subscription tender documents and follow-up bidding matters.

3.2 Bidding documents are available for sale from November 15, 2016 to November 25, 2016.

2) The result of the purchase of the bid shall be based on the collective platform.

3.3 The tender will be qualified after the trial. After the bid opening, the bid evaluation committee will review the bidder’s qualifications. The bids of bidders whose qualifications do not meet the requirements specified in the bidding documents will be treated as rejected bids.

Fourth, the submission of tender documents

4.1 Deadline for submitting tender documents (Bid deadline, the same below): 10:00 am on December 06, 2016 (if there is any change, we will notify you separately).

4.2 Delivery Location: Beijing (tentative)

4.3 Delivery method: Before the deadline for submitting tender documents, potential bidders submit paper tender documents and their electronic versions according to the requirements of the bidding documents, and complete the work of uploading the electronic bidding documents of the platform. If the documents are delivered late or not delivered to the designated place or are not sealed as required, the tenderee will not accept it.

4.4 Other submission methods and issues needing attention: The electronic version of the bidding documents needs to be submitted on the platform, and the electronic opening and evaluation of bids shall be implemented. The bidders shall not open or bid on the written tender documents, but only use them for archiving purposes.

The opening of the bid is subject to the electronic bid opening method. For bidders who are not familiar with the online bidding operation, we will hold a training conference.

Contact: Qian Yong

Mobile:

phone

fax

E-mail:

In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.

R&M Vape

RandM SWITCH Disposable Device Features:
☑6% Nicotine Salt.
☑8ML of E-liquid.
☑2400 Puffs per Device.
☑2in1 Flavor Switch
☑Draw-Activated Firing Mechanism.
☑Integrated 1100mAh Battery.
☑12 Flavors Available.
☑Disposable Device (Non-Rechargeable&Non-Refillable)
Flavors Available:
Plain Design:
1.Blueberry Ice & Gummy Bear
2.Orange Soda & Melon Ice
3.Watermelon Ice & Cola Ice
4.Banana Apple Ice & Peach Ice
5.Mixed Berries & Cool Mint
6.Strawberry Donut & Pineapple Ice
Cartoon Design:
7.Energy Drink & Guava ice
8.Strawberry Kiwi & Pina Colada
9.Red Apple Lemon & Oreo Milkshake
10.Aloe Grape & Mango ice
11.Orange Pineapple Mango & Tiger Blood
12.Honeydew ice & Sour Apple
Rick and Morty Design:
13.Strawberry Yogurt & Blue Razz
14.Peach oats & cherry lemonade
15.VANILLA Ice cream &FRUIT FUSION
16.Pinapple strawberry coconut & cotton candy
17.Honey passion fruit & Toffee
18.Banana ice & Pomegranate Ice

Lead Free Vaporizer E-Cigarette,Quartz Coil Cigarette Vaporizer Pen,Thick Oil Atomizer Vaporizer Pen,Pod Device Puff Bar

Shenzhen Ousida Technology Co., Ltd , https://www.osdvape.com

Posted on