MAX3986 1Gbps to 10.3Gbps linear equalizer
MAX3986 overview
The MAX3986 is a 4-channel low-power linear equalizer opTImized for use up to 10.3Gbps that compensates for losses encountered with FR-4 stripline and twin-ax cable. This linear equalizer is intended for use with decision- feedback equalizers (DFEs) integrated into ASICs as well as other applicaTIons where increased margin is needed rather than full signal regeneraTIon. DFEs can typically handle 20dB of channel loss at a frequency half the bit rate, assuming the channel is not degraded by reflecTIons and crosstalk. The extended linear range of the MAX3986 preserves the essential signal characteristics needed for optimum DFE performance. The analog equalization of the MAX3986 adds to the effectiveness of the DFE. This increases margin to tolerate environmental and manufacturing variations or to increase the length of the transmission line. The MAX3986 operates from a single 3.3V supply and is housed in a lead-free, 5mm x 7mm TQFN package.
Key features of MAX3986
Increases Margin of Decision-Feedback Equalizers Compatible with OOB Signals Extends Transmission Line Length Coding Independent, 8b / 10b or Scrambled 4 Channels per Device Analog Equalization Better Than 18dB Return Loss at 5.15GHz 33mA per Channel Supply Current Single 3.3V Supply 5mm x 7mm, Lead-Free TQFN PackageMAX3986 Application / Use
6Gbps SAS
8.5Gbps Fibre Channel active copper equipment DDR, 6.25Gbps IEEE 802.3ae XAUI
High-speed backplane OIF-CEI-6G
QDR, 10.0Gbps InfiniBandSM
Serial 10.3Gbps Ethernet
BR SOLAR Marked LED Street Lights adopt: High Quality Cree, Bridgelux, Epistar Chip,100LM-150LM/W; Special quadric optical lens which cast the rays of every LED onto a rectangular area,Getting better lighting effect for drivers and pedestrian; High transparent toughened glass and stainless steel or high purity aluminum reflector making higher lamp efficiency 0.95 to the road; High quality LED Constant Current Driver, efficiency at least 90%,makes our lamp works more stable; Design with Special LED PCB with in series and in parallel lines; Lamp wire according to GB/ISO/CE standard with Red + and Black
LED Street Lamp Technical Descriptions:
1.)Lamp Body: High-Pressure Die-Casting Aluminum. Corrosion Resistant,IP65 or IP68
2.)Application with Polyester Substance in its Surface.
3.)Reflector: High Purity Aluminum or Stainless Steel SS304,Mirror Polish.
4.)LED Cooler: Aluminum Material, Producing By Module
5.)Cover Glass: High Strength and High Transparent Toughened Glass
6.)Fastener Bolt and Screws: Stainless Steel, Anti-theft screw
7.)Ambient Temp:-40~+50°C;Humidity:10%~95%
8.)Arm Diameter: 48 or 60mm
9.)Lumen:100-110LM/W;120-130LM/W;140-150LM/W;Lifespan:50000-100000Hrs
Led Street Lights,Outdoor Led Street Lights,Led Solar Street Light,Dimmable Led Street Lights
Yangzhou Bright Solar Solutions Co., Ltd. , https://www.cnbrightsolar.com