National wire and cable large spot checks some manufacturers failed

The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China (AQSIQ) organized the Local Quality and Technical Supervision Bureau to carry out a nationwide supervision and random inspection of wire and cable products. The results showed that of the 3,803 batches of products that were sampled, 440 batches of unqualified products were obtained, and the product sampling pass rate was only 88.4%. Sampling results show that Anhui Saihua Cable Co., Ltd., Tianchang Botai Instrument Cable Co., Ltd. and other countries above spot checks list!

This spot check is mainly based on GB/T12706.1-2008 "Excluding Insulated Power Cables and Accessories Rated Voltage from 1kV to 35kV Part 1: Rated Voltage 1kV and 3kV Cables", GB/T5023.5-2008 "Rated Voltage 450/750V And the following PVC insulated cables - Part 5: Flexible cables", JB/T8734.3-1998 "PVC insulated cables and wires with rated voltage up to and including 450/750V and cords - Part 3: Flexible cords for connection" and other countries Standards and industry standards have examined the insulation and sheath thickness, the tension before and after insulation and sheathing, the weight loss of insulation and sheathing, the thermal insulation extension, the insulation shrinkage, the conductor resistance, and the flexural deflection test.

A total sample survey was conducted in Beijing, Tianjin, Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Guangxi, Hainan, Chongqing, and Sichuan. There were 3803 batches of 2,603 ​​companies in 30 provinces in Guizhou, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, Ningxia, and Xinjiang, with 3,363 batches of qualified products and 440 batches of unqualified products, and the product sampling pass rate was 88.4%.

As the second largest industry in the electrical and electronics industry, second only to the automobile manufacturing industry, wire and cable are aptly referred to as the "blood vessels" and "nerves" of the national economy. The spot check found that the XLPE insulated power cable jacket weight loss, insulation heat extension and insulation shrinkage of the three items were 121 batches, 47 batches and 62 batches of products were unqualified, accounting for this type of product unqualified general batch 72.0%, 28.0%, and 36.9% of the times; 25 items of power cable insulation thickness and sheath thickness were 25 batches and 39 batches were unqualified, accounting for 11.1% and 17.3% of unqualified batches of such products. The thickness of the thinnest part of the PVC insulated soft cable and wire insulation was 39 batches of unqualified products, which accounted for 17.8% of the unqualified total batches of the products; conductor resistance items of the power cable and cable wire were 12 batches respectively. The second and 21 batches of products were unqualified and accounted for 5.3% and 9.6% of the unqualified batches of such products. These projects are major hidden dangers related to safety, environmental protection and consumer health and safety.

It is reported that the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China has informed the local government and related departments of the quality supervision and inspection of wire and cable products across the country, and has instructed the relevant provincial quality and technical supervision departments to disqualify the spot checks in accordance with relevant laws and regulations. The products and their production enterprises shall be dealt with according to law and be rectified within a time limit.

Anhui Saihua Cable Co., Ltd. cross-linked polyethylene insulated PVC sheathed power cable Saihua 4×1.5YJV-0.6/12011-04-20 unqualified insulation elongation before aging; tensile strength change after insulation aging Rate; change rate of elongation at break after insulation aging; insulation heat extension; sheath weight loss Tianchang Botai Instrument Cable Co., Ltd. XLPE insulated PVC sheathed power cable Tianchang Botai 2×4YJV-0.6/12011- 04-26 Thickness of the thinnest part of failed jacket; tensile strength before insulation aging; elongation at break before insulation aging; rate of change in tensile strength after insulation aging; rate of change of elongation at break after insulation aging; weight loss of jacket.

Ni-Mh Battery is a kind of long shelf life battery ,it has high capacity and large current ,which can replace traditional dry cells ,take examples as below :

* This is high performance rechargeable Lithium Ion battery with instantaneous start up;

* Durable high impact plastic housing;

* High capacity, performance verified, hermetically sealed, lithium-ion cells;

* Protection against short circuit and improper charge;

* High reliability due to all welded Construction;

* Unit contains safety vented cells;

* 100% final testing;

* Replacement battery for Tait Orca 5000/5010/5020/5030 series two way radios.

•

Item                               Specification

Chemistry:                     Ni-MH

Voltage:                         Typical: 7.4V

Nominal Capacity:        2000mAh at 400mA to 6V at 23℃

Operating Temp:        -20 to +55 ℃

Storage Temp:            -30 to +45 ℃

Exterior/Housing:       Hard Plastic Case


APPLICATIONS:

* Tait Cougar 400; M A-Com Cougar 400;  M A-Com Cougar 6000P;  M A-Com Cougar 625P;  M A-Com Panther 400;  M A-Com Panther 600;  Tait Orca 5000; Tait Orca 5010; Tait Orca 5020; Tait Orca 5030; Tait Orca 5035; Tait Orca 5040;  GE, Ericsson Cougar 400; GE, Ericsson Cougar 6000P; GE, Ericsson Cougar 625P;  GE, Ericsson Panther 400; GE, Ericsson Panther 600.



Ni-Mh battery



Ni-MH Battery

Ni-Mh Battery,Rechargeable Ni-Mh Battery,Ni-Mh Rechargeable Battery,Ni-Mh Universal Battery

YFJ TECHNOLOGY (HK) CO.,LIMITED , http://www.yfjpower.com

Posted on